Chili Technology offers the ChiliPad Cube, also known as the ChiliPad, a mattress pad featuring a built-in temperature regulation system that provides both heating and hvac.
The pad is constructed with a central control unit known as the Cube, which is connected to a network of silicone microtubes. ChiliPad owners add hot or cold water, which circulates through the tubes before reaching the Cube. The temperature can be adjusted manually or with a wireless remote; owners can preset the temperature in one degree increments at from about 55 to 110 Fahrenheit (13 to 43 Celsius).
The ChiliPad could be obtained in a total of seven sizes. Four of these sizes Single, Twin XL, Full, and Split California King are single-zone pads, meaning contain one Cube unit and provide one temperature-regulated surface. The other three sizes Queen, King, and California king are dual-zone pads, making them a good option for couples with differing temperature preferences. A Twin-size ChiliPad had previously been available, but eventually discontinued due to low demand.
What You Would be wise to Know About The ChiliPad
- The ChiliPad Cube single- and dual-zone mattress pads are most suitable for:
- Single sleepers and couples who experience temperature-related discomfort (either too hot or too cold) during the twilight.
- Homeowners who'd like to you are able to on their heating and cooling bills.
- Pregnant ladies and other sleepers with medical conditions that cause excessively hot or excessively cold bedtime.
chiliPAD The ChiliPad Cube may not be suitable for:
- Sleepers who do not experience significant temperature-related issues the particular night.
- People who awaken easily due to noise.
- Those who find mattress pads beneath their fitted sheets uncomfortable.
How Does the ChiliPad Work?
Follow these five steps to operate the ChiliPad Cube:
Secure the mattress pad
The pad should be unfolded and placed on the top of the mattress and underneath a fitted bed sheet. The pad likewise has elastic corner straps for around the sides of the mattress extra stability. The microtubes can be placed at the head or foot belonging to the bed, depending on the owner's preferences.
Connect the tube for the cube
The Cube should rest on a flat surface with at least two feet (24?) of breathing room on each side. It should be plugged into an AC outlet, and really should be positioned with water tank best to prevent leakage. Owners can utilize risers spot the Cube beneath their bed. Connect the male end of the external tube attachment to the Cube's female connector. When connecting the tube to the Cube, the blue release button should be facing increasing.
Fill the cube with water
The Cube has a dent on the highest in which water ought to added. Unscrew the cap and add distilled water as needed. Once the Cube has reached full water capacity, turn the equipment on when using the power button near the outlet. The Cube will produce a gentle beep, immediately after which it the tubes will start to fill with water. As water is shipped into the tubes, owners will should try to add more distilled water to the Cube add water' indicator light goes finally out. They should then screw the cap back into place.
Please note: when new, the ChiliPad's water tank should have a trace volume water inside; this indicates the product has undergone quality control tests ahead of packaging. If the water is absent, the ChiliPad may not have been properly proved.
Adjust temperature
Two buttons one with a flame icon and another with a snowflake icon are simply next towards power mouse. Owners use these two buttons to increase or lessen the temperature in one-degree increments until their desired setting is have got to. A temperature reading displays the owner's setting, not the ChiliPad's current ambient temperature. Once the temperature been recently properly adjusted, the number will blink three scenarios. Most temperature changes take effect within quarter-hour.
In accessory for manual controls, owners can program temperatures with a radio remote. To activate the remote, hold down the Cube's power button for five seconds; the unit will beep and show a blinking 888' on temperature show. Turn on the far off at this point; the unit will beep again and display present temperature preset. To program the remote with a dual-zone pad, make sure one within the Cubes remains off throughout this techniques.
Power off cube when needed
To turn off the Cube, simply press the power button although is going for walks. The display will immediately turn off, though enthusiasts may run for several moments a bit longer. Owners are advised to unplug the Cube that they do not plan employ their ChiliPad in another 24 hours. To drain the Cube, use an H-shaped tool that includes the ChiliPad; the cross-shaped end is used to drain theCube, and the hollow end is used to drain the mattress pad.
Please note that dual-zone Chilipads (Queen, King, and California sizes) feature two microtube networks and a Cube a few minutes. To operate these, simply follow the steps mentioned above for each party of the material.
Sizing and Pricing
Current prices for all available ChiliPad sizes are listed in the table drop some weight .. Please note the pricing differences between pads together with Cube included and replacement pads
ProductNew (Pad and Cube)Replacement (Pad Only)
Single-size ChiliPad Cube (Single-zone)$499$249
Twin XL-size ChiliPad Cube (Single-zone)$599$289
Full-size ChiliPad Cube (Single-zone)$699$299
Queen-size ChiliPad Cube (Dual-zone)$999$379
King-size ChiliPad Cube (Dual-zone)$1,199$399
California King-size ChiliPad Cube (Dual-zone)$1,199$399
Split California King-size ChiliPad Cube (Single-zone)$649$289
Additionally, customers may purchase replacement Cube units for $399.
ChiliPad Features and Specs
The ChiliPad's features, functions, and product specifications have the following:
Temperature range: The Cube can be programmed in one-degree increments to reach temperatures about 55 to 110 Fahrenheit (13 to 43 Celsius). Certain factors such as bedroom temperature and sleeper weight may affect temperature delivery.
Cube dimensions: The Cube measures 9 1/4 wide, 9 1/4 long, and 7 1/2 tall. It weighs roughly nine pounds.
Energy usage: The average ChiliPad uses 80 n.
Power sources: The Cube's power cord must be plugged into an AC outlet to get results. The remote control requires two AAA battery pack.
Cord length: The power cord measures eight feet (8) in time-span.
Material composition: The mattress pad is established from a polyester and cotton combine. The microtubes are associated with medical-grade plastic.
ChiliPad weight limit: The information presented operates with as much as 500 pounds per area. However, heavier individuals won't experience the same temperature range as lighter individuals.
ChiliPad dimensions: The table below lists width, length, and thickness dimensions for your ChiliPad each available duration.
ChiliPad SizeZonesDimensions (Width x Length x Height)
Single130W x 75L x 3/4H
Twin Extra Long (XL)138W x 80L x 3/4H
Full153W x 75L x 3/4H
Queen260W x 80L x 3/4H
King276W x 80L x 3/4H
California King272W x 84L x 3/4H
Split California King136W x 84L x 3/4H
What's Added to a ChiliPad Purchase?
The belongings in a ChiliPad box be based upon whether a single- or dual-zone pad was owned. A full breakdown is listed in the table below.
Type of PadNumber of PadsNumber of CubesNumber of RemotesNumber of Drain Keys
Single-zone1111
Dual-zone1211
Additionally, all ChiliPad Cubes come using a user's manual, warranty, and registration card stoock.